View source for 2013 Summer Project Week:Open source electromagnetic trackers using OpenIGTLink

__NOTOC__

<gallery>
Image:PW-MIT2013.png|[[2013_Summer_Project_Week#Projects|Projects List]]
Image:Dry0030.png|Stylized image of three orthogonal coils used in 6-DOF electromagnetic tracker sensor
Image:Dry_elphel_model_1_rcvr_coils.jpg|Handmade assembly of three commercial solenoidal coils; each solenoid is 11 millimeters long
Image:Dry0432_1_1_screenshot2013-06-20.png|Screenshot of -10log10(GOF) in Slicer 3
</gallery>

==Key Investigators==
* Retired: Peter Traneus Anderson
* BWH: Tina Kapur, Sonia Pujol

<div style="margin: 20px;">
<div style="width: 27%; float: left; padding-right: 3%;">

<h3>Objectives</h3>

The primary goal of this open-source electromagnetic tracker project is to teach and develop open-source electromagnetic trackers, to enable extending performance in directions that existing proprietary trackers do not address.

The physics of electromagnetic trackers only just works. Tracker designers are continually struggling to get enough signal/noise from a small-enough sensor at a large-enough distance for a particular application. Magnetic-field distortion adds to the challenges.

Low-cost high-speed floating-point computation enables use of compute-intensive modeling and tracking algorithms which give improved accuracy.

</div>

<div style="width: 27%; float: left; padding-right: 3%;">

<h3>Approach, Plan</h3>

Pete expects to bring last year's hand-built tracker again this year.  Pete is partway through developing a USB-based tracker printed-circuit board set, to be demonstrated next year.

Pete's plan for the project week, is to use Slicer to visualize tracker errors versus position.

</div>

<div style="width: 40%; float: left;">

<h3>Progress</h3>

Pete successfully used his tracker simulator to image the logarithm of goodness-of-fit, -10log10(GOF), into a NRRD file, and imported that file into Slicer 3.  Example image is above.

Pete's laptop computer at Summer Project Week has 32-bit Ubuntu, so 64-bit Slicer 4 won't run.  Pete is running Slicer 4 on his desktop computer using 64-bit Slackware.

Next: Figure out meanings of the images.

</div>
</div>

<div style="width: 97%; float: left;">

==Delivery Mechanism==

==References==

Pete's published work to date is on
[[Open Source Electromagnetic Trackers|Open Source Electromagnetic Trackers]]
and on [[http://home.comcast.net/~traneus http://home.comcast.net/~traneus]].

</div>