Difference between revisions of "OpenIGTLink/ProtocolV2/Type/SensorData"
From NAMIC Wiki
(→SENSOR) |
(→SENSOR) |
||
| Line 61: | Line 61: | ||
| align="left" | DATA (NSENSORS-1) | | align="left" | DATA (NSENSORS-1) | ||
| align="left" | float64[LARRAY 1] | | align="left" | float64[LARRAY 1] | ||
| − | | align="left" | value array for sensor 1 | + | | align="left" | value array for sensor (NSENSORS-1) |
|- | |- | ||
|} | |} | ||
Revision as of 21:28, 8 November 2010
Home < OpenIGTLink < ProtocolV2 < Type < SensorDataContents
Summary
SDATA is a message type, which is used to transfer sensor reading, 3-axis position, velocity, acceleration, angle, angle velocity and angle acceleration. The message format is intended for manipulator control and various types of sensors.
Message Types
SENSOR
| Data | Type | Description |
| NSENSORS | UINT16 | Number of sensors |
| FORMAT 0 | ||
| LARRAY 0 | UINT8 | Length of array (0-255) |
| SIPREFIX 0 | INT8 | SI-prefix (-127 - 128) (see bellow) |
| DIMENSION 0 | UINT8[6] | Dimension (see bellow) |
| ... | ||
| FORMAT (NSENSORS-1) | ||
| LARRAY (NSENSORS-1) | UINT8 | Length of array (0-255) |
| SIPREFIX (NSENSORS-1) | INT8 | SI-prefix (-127 - 128) (see bellow) |
| DIMENSION (NSENSORS-1) | UINT8[6] | Dimension (see bellow) |
| DATA | ||
| DATA 0 | float64[LARRAY 0] | value array for sensor 0 |
| DATA 1 | float64[LARRAY 1] | value array for sensor 1 |
| ... | ||
| DATA (NSENSORS-1) | float64[LARRAY 1] | value array for sensor (NSENSORS-1) |
GET_TDATA
| Data | Type | Description |
STT_SENSOR
N/A
STP_SENSOR
N/A
RTS_SENSOR
N/A
Implementations
The TDATA message type is implemented in the following source code.
Contributors
Junichi Tokuda, Yuichiro Hayashi
