Difference between revisions of "IGT:ToolKit/Build-IGSTK-Windows"

From NAMIC Wiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Build IGSTK===
 
===Build IGSTK===
  
−
*Create directory '''IGSTK-build''', then configure the project using CMake 2.6 or hiher. Here is an example of how IGSTK is configured:
+
*Create directory '''IGSTK-build''', then configure the project using CMake 2.6 or higher. Here is an example of how IGSTK is configured:
 +
[[Image:Igstk_cmake_options.jpg|300px|thumb|IGSTK cmake options]]
  
−
BUILD_DOCUMENTATION              OFF
+
*Bring up Visual Studio, open the project in IGSTK-build and build everything there.
−
BUILD_TESTING                    ON
 
−
CMAKE_BACKWARDS_COMPATIBILITY    2.4
 
−
CMAKE_BUILD_TYPE
 
−
CMAKE_INSTALL_PREFIX            /usr/local
 
−
DART_ROOT                        DART_ROOT-NOTFOUND
 
−
EXECUTABLE_OUTPUT_PATH          /home/hliu/projects/igstk/IGSTK-build/bin
 
−
IGSTK_BUILD_EXAMPLES            ON
 
−
IGSTK_BUILD_TESTING              ON
 
−
IGSTK_DEVELOPMENT_VERSION        ON
 
−
IGSTK_TEST_AURORA_ATTACHED      ON
 
−
IGSTK_TEST_AURORA_PORT_NUMBER    0
 
−
IGSTK_TEST_LOOPBACK_ATTACHED    OFF
 
−
IGSTK_TEST_LOOPBACK_PORT_NUMBE  1
 
−
IGSTK_TEST_POLARIS_ATTACHED      OFF
 
−
IGSTK_TEST_POLARIS_PORT_NUMBER  0
 
−
IGSTK_USE_FLTK                  OFF
 
−
IGSTK_USE_MicronTracker          OFF
 
−
IGSTK_USE_Qt                    OFF
 
−
ITK_DIR                          /home/hliu/projects/Slicer3-lib/Insight-build
 
−
LIBRARY_OUTPUT_PATH              /home/hliu/projects/igstk/IGSTK-build/bin
 
−
VTK_DIR                          /home/hliu/projects/Slicer3-lib/VTK-build
 
−
 
 
−
If the previous command has completed without error, you can start building
 
−
  $ make
 
  
 
===Build IGSTKSandbox===
 
===Build IGSTKSandbox===
−
cd to your '''igt-tutorial''' folder, then
 
−
 
−
  $ mkdir IGSTKSandbox-build
 
−
  $ cd IGSTKSandbox-build
 
−
  $ ccmake ../IGSTKSandbox
 
−
 
−
Configure using CMake 2.6.  You need ITK, VTK and IGSTK for this configuration.  ITK and VTK can be found in your '''Slicer3-lib''' folder after Slicer3 has been built.  IGSTK was built in the previous step.  Here is an example of how IGSTK is configured (note that you should refer to the IGSTK folder and not the IGSTK-build folder):
 
  
−
BUILD_SHARED                    ON
+
*Create directory '''IGSTKSandbox-build''', then configure the project using CMake 2.6 or higher. Here is an example of how IGSTKSandbox is configured:
−
BUILD_TESTING                    ON
+
[[Image:Igstksandbox_cmake_options_1.jpg|300px|thumb|IGSTKSandbox cmake options (part 1)]]
−
CMAKE_BACKWARDS_COMPATIBILITY    2.4
+
[[Image:Igstksandbox_cmake_options_2.jpg|300px|thumb|IGSTKSandbox cmake options (part 2)]]
−
CMAKE_BUILD_TYPE
 
−
CMAKE_INSTALL_PREFIX            /usr/local
 
−
DART_ROOT                        DART_ROOT-NOTFOUND
 
−
DOT                              DOT-NOTFOUND
 
−
EXECUTABLE_OUTPUT_PATH          /home/hliu/projects/igstk/IGSTKSandbox-build/bin
 
−
FLTK_DIR                        FLTK_DIR-NOTFOUND
 
−
IGSTKSandbox_BUILD_EXAMPLES      ON
 
−
IGSTKSandbox_BUILD_SUPERVISED_  OFF
 
−
IGSTKSandbox_BUILD_TESTING      ON
 
−
IGSTKSandbox_SEND_TRANSFORMS_T  ON
 
−
IGSTKSandbox_TEST_AURORA_ATTAC  ON
 
−
IGSTKSandbox_TEST_AURORA_PORT_  0
 
−
IGSTKSandbox_TEST_FLOCKOFBIRD_  OFF
 
−
IGSTKSandbox_TEST_FLOCKOFBIRD_  1
 
−
IGSTKSandbox_TEST_LOOPBACK_ATT  OFF
 
−
IGSTKSandbox_TEST_LOOPBACK_POR  1
 
−
IGSTKSandbox_TEST_POLARIS_ATTA  OFF
 
−
IGSTKSandbox_TEST_POLARIS_PORT  0
 
−
IGSTKSandbox_USE_FLTK            OFF
 
−
IGSTKSandbox_USE_MicronTracker  OFF
 
−
IGSTKSandbox_USE_OpenIGTLink    ON
 
−
IGSTKSandbox_USE_Qt              OFF
 
−
IGSTKSandbox_USE_vtkKWImage      ON
 
−
IGSTK_SOURCE_DIR                /home/hliu/projects/igstk/IGSTK
 
−
IGSTK_USE_COORDINATE_REFERENCE  ON
 
−
ITK_DIR                          /home/hliu/projects/Slicer3-lib/Insight-build
 
−
LIBRARY_OUTPUT_PATH              /home/hliu/projects/igstk/IGSTKSandbox-build/bin
 
−
VTK_DIR                          /home/hliu/projects/Slicer3-lib/VTK-build
 
  
−
If the previous command has completed without error, you can start building
+
*Bring up Visual Studio, open the project in IGSTKSandbox-build and build everything there.
−
  $ make
 

Latest revision as of 01:22, 21 May 2009

Home < IGT:ToolKit < Build-IGSTK-Windows

Build IGSTK

  • Create directory IGSTK-build, then configure the project using CMake 2.6 or higher. Here is an example of how IGSTK is configured:
IGSTK cmake options
  • Bring up Visual Studio, open the project in IGSTK-build and build everything there.

Build IGSTKSandbox

  • Create directory IGSTKSandbox-build, then configure the project using CMake 2.6 or higher. Here is an example of how IGSTKSandbox is configured:
IGSTKSandbox cmake options (part 1)
IGSTKSandbox cmake options (part 2)
  • Bring up Visual Studio, open the project in IGSTKSandbox-build and build everything there.
Retrieved from "https://www.na-mic.org/w/index.php?title=IGT:ToolKit/Build-IGSTK-Windows&oldid=37666"