2008 June Workshop Germany

Sponsors

• 

  National Alliance for Medical Image Computing

• 

  Computer Aided Medical Procedures, TU Munich

• 

  DFG

• 

  Neuroimage Analysis Center

• 

  National Center for Image Guided therapy

• 

  BIRN

• Please note that this workshop is still pending approval by DFG
• June 15-17, IHK Akademie Westerham

Introduction

This is a hands-on workshop about the NA-MIC kit. The workshop is intended for participants from within Germany and it is expected to be sponsored by the DFG. The target audience for this workshop are scientists with an engineering background who are considering using the NA-MIC kit as their software platform for research. The NA-MIC kit consists of free open source software without restrictions on use and without a give-back requirement. The NA-MIC kit is well-suited for both academic and commercial activities.

The participants will receive an overview of the software libraries, the end-user applications, and documentation that comprise the NA-MIC kit. The curriculum is hands-on which means that participants are required to attend the workshop with a suitable laptop, preloaded with the software and sample data as specified below. Attendance is limited in order to ensure quality interactions between the faculty and participants.

Program

Arrival: Sunday, June 15

Time	Monday, June 16	Tuesday, June 17
08.00-08.30	Breakfast	Breakfast
08.30-10.00	08.30-08.45 Welcome (Navab, Kikinis) 08.45-10.00 Engineering methodology: (Jomier, Barre) Extreme programming What is a software engineering methodology, do I need one? The components of the NA-MIC kit software engineering tools: CMAKE, CTEST, CPACK, Dashboards	08.30-10.00 Slicer3 IGT Slicer 3 IGT capabilities (Pace, Hata, Pieper) IGT Workflows (Pace) Application specific modules: Neuro, MRIg Prostate, Cardiac 3D US (Hata)
10.00-10.30	Coffee Break	Coffee Break
10.30-12.30	How to use ITK, VTK, XNAT and Batchmake ITK (Jomier) VTK (Barre) KWWidgets (Barre) XNAT (Pieper) Batchmake (Jomier)	Slicer 3 IGT continued I/O to trackers, devices, and scanners: Open IGT Link (Hata) Lego robot tutorial as an example of robot control (Pace) CUDA based volume rendering (Hata)
12.30-13.30	Lunch	Lunch
13.30-15.00	Slicer3 Slicer 3 introduction & capabilities (Pieper, Pujol, Pace) Slicer 3 architecture	Plug-ins for Slicer 3 (Pujol) Introduction: Plug-ins as a way to interface external programs (Pujol) Programming into Slicer3 - How-to make a "hello world" plug-in Part 1 (Pujol)
15.00-15.30	Coffee Break	Coffee Break
15.30-18.00	Loading, Visualization (Pujol) The EM segmenter in Slicer (Pujol)	15.30-17.30 Plug-ins continued Programming into Slicer3 - How-to make a "hello world" plug-in Part 2 (Pujol) 17.30-18.00 Registration in Slicer 3 (Jomier)
18.00-19.00	18.00-18.45 MITK (somebody from the DKFZ)	18.00-18.15 Closing remarks (Navab, Kikinis)
19.00-open	Dinner	Dinner

Prerequisites: Hardware and Software

Participants are required to install the following components on their laptop in preparation for the workshop.

• Slicer 3
• CMake
• Working ITK environment
• Working VTK environment
• Common test database - TBD
• Working compiler (gcc, gcc-c++ or visual studio)
• Datasets: SlicerSampleVisualization.tar.gz and HelloWorld.zip.

Note: We recommend a minimum of 2 GB of RAM and a dedicated graphic accelerator with 128 MB of on board graphic memory.

Windows XP, Linux (x86 and x86_64) and Darwin (ppc and x86) are supported.

Faculty

1. Ron Kikinis
2. Steve Pieper
3. Noby Hata
4. Sonia Pujol
5. Danielle Pace
6. Sebastien Barre
7. Julien Jomier

• Local Host: Nassir Navab

Venue and Logistics

The workshop will take place at the IHK Akademie Westerham on June the 16th and 17th, 2008 which is located south-east of Munich. Faculty and participants are expected to arrive at the venue on Sunday the 15th to allow the workshop to begin on time on Monday morning.

All participants will receive a letter of invitation from the DFG. In addition to the workshop program the letter will contain a form that needs to be filled out and sent back to the DFG in order to get reimbursed for travel and accommodation costs.

Information on Public Transport for Local Travel

In regard to the ticket you need for local travel: you have two options depending on the size of the traveling group. You can either go for a partner day ticket (18 €, all zones/Gesamtnetz) or a single day ticket (10 €, all zones/Gesamtnetz).

Coming from the Munich Airport

When going to the subway station at the airport you can choose between any of the two subways, either S1 (west route) or S8 (east route) though the S8 is probably beneficial in terms of journey time (approx. 35 minutes).

With both trains you should travel to the station Ostbahnhof.

At Ostbahnhof you need to change to the S6 (direction Giesing) and leave the train at the terminal stop Kreuzstraße.

Coming from the Central Station

At central station you can directly enter the S6 (direction Karlsplatz/Stachus or Marienplatz) and leave the train at the terminal stop Kreuzstraße. The traveling time is around 50 minutes.

The last meters

At Kreuzstraße you need to change into a regional express (e.g. RB30239, RB30245, RB30247, direction Bad Aibling) which you will leave at the fist stop in Westerham. This final train trip requires an extra ticket which costs around 2€.