Difference between revisions of "IGT:ToolKit/Build-Tracker-Simulator"

Revision as of 22:24, 10 October 2008

Home < IGT:ToolKit < Build-Tracker-Simulator

Slicer3 is assumed to have been built on your computer in the directory igt-tutorial
CMake 2.6 is absolutely required. If you don't have it installed, you can use the version of ccmake found in igt-tutorial/Slicer3-lib/CMake-build/bin (it will be CMake 2.6)

First, get the tracker simulator source code from the repository:

 $ cd igt-tutorial
 $ svn co http://www.na-mic.org/svn/NAMICSandBox/trunk/BRPTools/ScannerIO ScannerIO

Configure using CMake 2.6: You should not need to change any settings - just press the 'c' key followed by the 'g' key to generate the makefiles.

Windows

Open ScannerIO.sln in the ScannerIO folder
Build -> Build Solution
Copy ScannerIOLib.dll from the ScannerIO/Debug folder to the ScannerIO/bin/Debug folder
Make sure the Windows firewall is off

Upon completion, you will find TrackerSim.exe in ScannerIO/bin/Debug

Linux / Mac OS X

$ cd ScannerIO
$ ccmake .

If the previous command has completed without error, you can start building:

 $ make

Upon completion, you should find the TrackerSim executable file in ScannerIO/bin

@@ Line 12: / Line 12: @@
 Configure using CMake 2.6:  You should not need to change any settings - just press the 'c' key followed by the 'g' key to generate the makefiles.
+''' Windows '''
+* Open ScannerIO.sln in the ScannerIO folder
+* Build -> Build Solution
+* Copy ScannerIOLib.dll from the ScannerIO/Debug folder to the ScannerIO/bin/Debug folder
+* Make sure the Windows firewall is '''off'''
+Upon completion, you will find TrackerSim.exe in ScannerIO/bin/Debug
+''' Linux / Mac OS X'''
   $ cd ScannerIO
   $ ccmake .
@@ Line 18: / Line 27: @@
    $ make
-Upon completion, you should find the '''TrackerSim''' executable file at ScannerIO/bin
+Upon completion, you should find the '''TrackerSim''' executable file in ScannerIO/bin