Difference between revisions of "CTSC:MGHresources:The Photon Migration Laboratory"

From NAMIC Wiki
Jump to: navigation, search
(New page: Facilities consists of 5 separate lab facilities for 1) fiber optic and electronics fabrication and testing, 2) instrumentation system development and testing, 3) small animal studies, 4) ...)
 
Line 1: Line 1:
Facilities consists of 5 separate lab facilities for 1) fiber optic and electronics fabrication and testing, 2) instrumentation system development and testing, 3) small animal studies, 4) an optical physics lab with a floating table, and 5) human subject testing. Instrumentation in the Photon Migration Lab includes:
+
Facilities consists of 5 separate lab facilities for  
 +
*fiber optic and electronics fabrication and testing,  
 +
*instrumentation system development and testing,  
 +
*small animal studies,
 +
*an optical physics lab with a floating table, and  
 +
*human subject testing.  
 +
 
 +
'''Instrumentation in the Photon Migration Lab includes:'''
 
* A multi-photon microscope, built in house, capable of 20 images per second with 200x200 pixels.
 
* A multi-photon microscope, built in house, capable of 20 images per second with 200x200 pixels.
 
* A continuous-wave diffuse optical tomography (CW4) imaging system with 18 lasers and 16 detectors (manufactured by TechEn).
 
* A continuous-wave diffuse optical tomography (CW4) imaging system with 18 lasers and 16 detectors (manufactured by TechEn).
Line 15: Line 22:
 
* 50mW diode-pumped solid state laser (532 nm).
 
* 50mW diode-pumped solid state laser (532 nm).
  
Other equipment includes:
+
'''Other equipment includes:'''
  
 
* Electronics: 1 Gs/s digital oscilloscope (HP Infiniium), numerous data acquisition cards, network analyzer, 24-node Linux Beowulf system.
 
* Electronics: 1 Gs/s digital oscilloscope (HP Infiniium), numerous data acquisition cards, network analyzer, 24-node Linux Beowulf system.

Revision as of 01:07, 12 March 2009

Home < CTSC:MGHresources:The Photon Migration Laboratory

Facilities consists of 5 separate lab facilities for

  • fiber optic and electronics fabrication and testing,
  • instrumentation system development and testing,
  • small animal studies,
  • an optical physics lab with a floating table, and
  • human subject testing.

Instrumentation in the Photon Migration Lab includes:

  • A multi-photon microscope, built in house, capable of 20 images per second with 200x200 pixels.
  • A continuous-wave diffuse optical tomography (CW4) imaging system with 18 lasers and 16 detectors (manufactured by TechEn).
  • Two additional CW-DOT imaging systems (CW5), each with 32 lasers and 32 detectors (also manufactured by TechEn).
  • A time-resolved spectroscopy system with pulsed laser diodes at 4 wavelengths and 4 photon-counting photo-multiplier tubes (manufactured by PicoQuant).
  • An ISS system with 16 laser diodes and 4 photomultiplier detectors (Imagent™ functional brain imaging).
  • A time-domain diffuse optical tomography (TD-DOT) imaging system, with an imaged intensified CCD detector and optically multiplexed sources (constructed in-house with the support of Advanced Research Technologies http://www.art.ca ).
  • A Mai:Tai Titanium:Saphire Laser (manufactured by SpectraPhysics)
  • 2 Ocean Optics Spectrographs (model S2000)
  • 4 Near-infrared spectroscopy systems (NIRS 1 and 2) (custom made by TechEn).
  • 8-bit CCD camera (Cohu 4910) and various white light lamps, a mercury xenon lamp (200W, Oriel) with housing and SMA connector, a mercury lamp (200W, Oriel) for speckle microscopy.
  • 8-bit CCD camera (DALSA) capable of 950 frames per second with 256x256 pixels.
  • TE-cooled 12-bit CCD (Coolsnap fx, Roper Scientific).
  • TE-cooled 16-bit CCD (Cascade, Roper Scientific).
  • 50mW diode-pumped solid state laser (532 nm).

Other equipment includes:

  • Electronics: 1 Gs/s digital oscilloscope (HP Infiniium), numerous data acquisition cards, network analyzer, 24-node Linux Beowulf system.
  • Optical fiber equipment: single-mode, multi-mode and fiber bundles, optical fiber polishing equipment, and optomechanical fiber coupling.
  • Optomechanical equipment: breadboards for mounting optical components, three-dimensional translation stages, optical mounting hardware, various diode lasers and white light sources and other optics, electro-optics and electronics equipment.
  • Optics: various lenses, microscope objectives, mirrors, filters, beamsplitters, orthogonal galvanometer mounted mirrors (Cambridge, 6810).