Slicer3:Slicer Daemon

Goals and Functionality

The Slicer Daemon refers to a network protocol that can be used to connect to a running instance of slicer to read and write data in the MRML scene and execute other commands. The name is based on the unix system convention of naming network services 'daemons'.

Server Implementation

The file slicerd.tcl implements the server side functionality.

By default it listens for connections on port 18943.

Clients

Tcl

Two utilities are provided:

• slicerget.tcl is used to read volumes out of slicer. The volume is written to the stdout of the slicerget command in nrrd format.

• slicerput.tcl is used to write volumes into slicer. The volume is read in nrrd format from stdin of slicerput and loaded into the mrml scene.

Some sample commands (assumes your PATH is correctly set to include unu, slicerget and slicerput):

# a noop -- just copy image onto itself
slicerget.tcl 1 | slicerput.tcl noop

# put external data into slicer
unu 1op abs -i d:/data/bunny-small.nrrd | slicerput.tcl

# run an external command and put the data back into slicer
slicerget.tcl 1 | unu 1op abs -i - slicerput.tcl abs

Python

A Python based set of code for interacting with the Slicer Daemon is provided.

For example, the following code reads a volume and creates a new volume where each voxel is the square of the corresponding voxel of the input image. The new image is then sent back to slicer.

import slicerd
import numpy

s = slicerd.slicerd()

n = s.get(0)

im = n.getImage()
n.setImage( im * im )

s.put(n, 'newImage')

For example, the following code reads a volume and extracts a slice of it for plotting using the matplotlib code (see the SciPy website for more info on Python numerics and plotting).

import slicerd
import pylab

s = slicerd.slicerd()

n = s.get(0)

slice = n.getImage()[16,:,:]
pylab.imshow(slice)
pylab.show()

Matlab

Note: this is initial documentation only.

Matlab based versions of Slicer Daemon client code are available.

This project has been worked on during the NAMIC project week 2007.

The Matlab scripts getSlicerVolume.m and putSlicerVolume.m use Matlab extention popen to connect to stdout(stdin respectively) of the tcl client slicerget.tcl (slicerput.tcl respectively). The tcl client establishes a channel to the SlicerDaemon socket and requests(sends) data. Thanks to Dan Ellis for letting us incorporate the popen matlab code into Slicer.

The SlicerDaemon in combination with matlab scripts provided here support the exchange of scalar and tensor volumes between Slicer and Matlab that are in orientation right-anterior-superior or left-posterior-superior. DWI volumes and other orientations are not supported yet.

Basic Slicer-Matlab tutorial

Here a step by step tutorial how to send a volume from Slicer to Matlab and then from back from Matlab to Slicer:

• Start Slicer3 with parameter "--daemon" and load the (scalar or tensor) volume you want to send to Matlab.
• Start Matlab and for conveniance change into the "Matlab" subdirectory of the SlicerDaemon module in Slicer3 (something like ../Slicer3/Modules/SlicerDaemon/Matlab)
• Initally, the popen C functions need to be compiled for your machine (this is not handled by cmake yet). This needs to be done only once in Matlab:

mex popen/popenw.c
mex popen/popenr.c

• Typing the following command in Matlab, the Slicer volume named "wcase1.nhdr" will be piped into a Matlab structure called "slicer_volume":

slicer_volume = getSlicerVolume('wcase1.nhdr')

All volumes that come out of Slicer are in 'right-anterior-superior' orientation, have 'raw' encoding, and 'little' endian. Even if the original file loaded into Slicer had other header parameters.

The resulting Matlab strucuture will looks like this (for a scalar volume):

slicer_volume = 
           content: 'wcase1.nhdr'
              type: 'short'
         dimension: 3
             space: 'right-anterior-superior'
             sizes: [256 256 124]
            endian: 'little'
          encoding: 'raw'
       spaceorigin: [119.5310 -92.2500 119.5310]
        spaceunits: {'mm'  'mm'  'mm'}
             kinds: {'space'  'space'  'space'}
              data: [256x256x124 int16]
   spacedirections: [3x3 double] 

or like that (for a tensor volume):

slicer_volume =  
            content: 'helix.nhdr'
               type: 'float'
          dimension: 4
              space: 'right-anterior-superior'
              sizes: [7 64 32 12]
             endian: 'little'
           encoding: 'raw'
        spaceorigin: [-6.9386 -28.7554 -8.7247]
         spaceunits: {'"mm"'  '"mm"'  '"mm"'}
              kinds: {'3D-masked-symmetric-matrix'  'space'  'space'  'space'}
               data: [4-D single]
    spacedirections: [3x3 double]
   measurementframe: [3x3 double]
         centerings: {'???'  'cell'  'cell'  'cell'}

Instead of typing the name the volume has in Slicer, you can choose the volume by its Slicer-id. The ids are given in the order volumes are loaded in Slicer. This command fetches the volume loaded first in Slicer:

slicer_volume = getSlicerVolume(0)

• Now the volume data can be processed in Matlab. Just for example, here the volume is thresholded:

slicer_volume.data(slicer_volume.data > 100) = 0;

• By changing the field "content", the name of the volume node in Slicer will be changed:

slicer_volume.content='Matlab_says_hi';

• This command sends the volume back to Slicer:

putSlicerVolume(slicer_volume)

Slicer-Matlab interface and tensor data

When sending tensor data from Matlab to Slicer and vice versa, there a couple of issues regarding tensor orientation need to be considered. In the original file itself, the tensor data usually lives in the "diffusion-sensitizing gradient space". When loading into Slicer3 though, the tensor data automatically gets transformed into so-called IJK-space, or "Index space". This is necessary for good filter performance in Slicer3, since most ITK based filters require the data to be in ijk space.