2011 Summer Project Week Patient Mounted Robot

From NAMIC Wiki
Jump to: navigation, search
Home < 2011 Summer Project Week Patient Mounted Robot
Back to NA-MIC_Collaborations, Site1 Algorithms, Site2 DBP 1

Patient-mounted Robot Control using OpenIGTLink

The aim of this project is to port existing robot control software for Robopsy and integrate it into 3D slicer using OpenIGTLink.

Description

The goal of this project is to port existing robot control software for Robopsy and integrate it into 3D slicer using OpenIGTLink.

Key Investigators

Conor James Walsh, Maryam Shokri, Faye Wu

Progress

-Have used Skeleton Generator to generate template code for 3D Slicer module to collect fiducials. The registration algorithm was modified. The location of each fiducial on the robot was determined. The registration algorithm employs the position of markers on the robot and the fiducial positions which are collected from the image. The initial position for the needle holder was determined for the registration. The possibilities of adding GUI widgets to the registration module in the 3D slicer were discussed with collaborators.

-Discussed employing of other available modules like segmentation in our module for generating semi-automatic registration technique. This technique incorporates user feedback and image segmentation for more accurate registration.

-Installed the controller software on Linux and modified the C++ code to send the commands to the robot.

-Discussed connecting the controller to the 3D slicer using OpenIGTLink.

-IGTLoadableModules will be employed to integrate the controller code.

Publications

In Print

In Press

  • Author1, Author2. "Title1". Publisher Info, etc.
  • Author1, Author2. "Title2". Publisher Info, etc.