GWE MiniRetreat:PrototypeParameterExplorer
From NAMIC Wiki
Revision as of 14:06, 23 February 2009 by Pieper (talk | contribs) (→Source code to generate the parameter explorer prototype interface using slicer3)
Home < GWE MiniRetreat:PrototypeParameterExplorer
Source code to generate the parameter explorer prototype interface using slicer3
# # To use, source this file into a running slicer3 (use Tcl interactor). # Load one of the output .nrrd files into slicer # Then in tcl interactor: # % loadStudy <path to gwe-generated.csv file> # % createGUI # # proc selectVolume {id} { set selectionNode [$slicer3::ApplicationLogic GetSelectionNode] $selectionNode SetReferenceActiveVolumeID $id $::slicer3::ApplicationLogic PropagateVolumeSelection } proc findVolumes {} { set idList "" set mrml $::slicer3::MRMLScene set size [$mrml GetNumberOfNodesByClass "vtkMRMLScalarVolumeNode"] for {set i 0} {$i < $size} {incr i} { lappend idList [$node GetID] } return $idList } proc cycleVolumes { {idList ""} } { if { $idList == "" } { set idList [findVolumes] } foreach id $idList { puts "Showing $id" selectVolume $id update } } proc removeVolumes { {idList ""} } { if { $idList == "" } { set idList [findVolumes] } set mrml $::slicer3::MRMLScene foreach id $idList { $mrml RemoveNode [$mrml GetNodeByID $id] } } proc saveImage {fileName} { set slice [lindex [vtkSlicerSliceLogic ListInstances] 0] set writer [vtkPNGWriter New] $writer SetFileName $fileName $writer SetInput [$slice GetImageData] $writer Write $writer Delete #set w [$::slicer3::Application GetNthWindow 0] #set title [wm title [$w GetWidgetName]] #exec xwd -name $title } proc loadCycle {} { removeVolumes set volumeLogic [$::slicer3::VolumesGUI GetLogic] set lastNode "" for {set i 1} {$i < 10} {incr i} { set dir /workspace/pieper/data/gradient-test set node [$volumeLogic AddArchetypeVolume $dir/$i.nrrd $i 0] selectVolume [$node GetID] update if { $lastNode != "" } { $slicer3::MRMLScene RemoveNode $lastNode } set lastNode $node } } proc loadVolume { fileName name } { set oldVolumes [findVolumes] set volumeLogic [$::slicer3::VolumesGUI GetLogic] set node [$volumeLogic AddArchetypeVolume $fileName $name 0] if { $node != "" } { selectVolume [$node GetID] removeVolumes $oldVolumes } return $node } proc loadStudy { {fileName /data/gwe-testing/gradient-test/gradient.csv} } { set fp [open $fileName "r"] gets $fp header set headers [split $header ","] array unset ::STUDY array set ::STUDY "" set ::STUDY(variables) [lrange $headers 1 3] foreach varName $::STUDY(variables) { set ::STUDY($varName,values) "" } set fileNumber 1 while { ![eof $fp] } { gets $fp line set linelist [split $line ","] set vars [lrange $linelist 1 3] set values "" foreach var $vars varName $::STUDY(variables) { set value [lindex $var 0] lappend values $value set ::STUDY($fileNumber,$varName) $value if { [lsearch $::STUDY($varName,values) $value] == -1 } { lappend ::STUDY($varName,values) $value } } set ::STUDY($values) $fileNumber set ::STUDY($fileNumber,fileName) [file dirname $fileName]/$fileNumber.nrrd incr fileNumber } close $fp } proc createImages {} { set fileKeys [array names ::STUDY *fileName] set index 0 foreach fileKey $fileKeys { set fileName $::STUDY($fileKey) set startTime [clock seconds] update set node [loadVolume $fileName $fileName] if { $node != "" } { set fileNumber [lindex [split $fileKey ","] 0] saveImage [file dirname $fileName]/$fileNumber.png incr index } else { puts "no volume for $fileKey" } puts "processing $index of [llength $fileKeys] ($fileName) ([expr [clock seconds] - $startTime] seconds)" } } proc createGUI {} { catch "destroy .t" toplevel .t wm title .t "GWE/Slicer3 Parameter Space Explorer" foreach varName $::STUDY(variables) { pack [ scale .t.$varName -orient horizontal -label $varName -command scaleCallback -from 0 -to [expr [llength $::STUDY($varName,values)]-1] ] -fill x -expand true } pack [button .t.load -text load -command buttonCallback] if { [info command imageViewer] != "" } { imageViewer Delete } vtkImageViewer imageViewer imageViewer SetColorWindow 255 imageViewer SetColorLevel 128 } proc guiValues {} { set values "" foreach varName $::STUDY(variables) { set valueIndex [.t.$varName get] lappend values [lindex $::STUDY($varName,values) $valueIndex] } return $values } proc buttonCallback {args} { set values [guiValues] set fileNumber $::STUDY($values) set fileName $::STUDY($fileNumber,fileName) puts "loadVolume $fileName $values" loadVolume $fileName $values } proc scaleCallback { args } { set values [guiValues] set fileNumber $::STUDY($values) set fileName $::STUDY($fileNumber,fileName) set pngFile [file dirname $fileName]/$fileNumber.png puts "view $pngFile" if { [file exists $pngFile] } { set reader [vtkPNGReader New] $reader SetFileName $pngFile imageViewer SetInput [$reader GetOutput] imageViewer Render } }
Sample csv data file
Run,conductance,timeStep,iterations,fileOut,SLICER_CMD 1,"0.5","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 2,"0.5","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 3,"0.5","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 4,"0.5","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 5,"0.5","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 6,"0.5","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 7,"0.6","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 8,"0.6","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 9,"0.6","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 10,"0.6","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 11,"0.6","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 12,"0.6","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 13,"0.7","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 14,"0.7","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 15,"0.7","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 16,"0.7","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 17,"0.7","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 18,"0.7","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 19,"0.8","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 20,"0.8","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 21,"0.8","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 22,"0.8","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 23,"0.8","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 24,"0.8","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 25,"0.9","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 26,"0.9","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 27,"0.9","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 28,"0.9","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 29,"0.9","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 30,"0.9","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 31,"1.0","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 32,"1.0","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 33,"1.0","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 34,"1.0","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 35,"1.0","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 36,"1.0","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 37,"1.1","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 38,"1.1","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 39,"1.1","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 40,"1.1","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 41,"1.1","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 42,"1.1","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 43,"1.2","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 44,"1.2","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 45,"1.2","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 46,"1.2","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 47,"1.2","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 48,"1.2","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 49,"1.3","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 50,"1.3","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 51,"1.3","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 52,"1.3","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 53,"1.3","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 54,"1.3","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 55,"1.4","0.05","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 56,"1.4","0.06","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 57,"1.4","0.07","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 58,"1.4","0.08","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 59,"1.4","0.09","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 60,"1.4","0.10","1","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 61,"0.5","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 62,"0.5","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 63,"0.5","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 64,"0.5","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 65,"0.5","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 66,"0.5","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 67,"0.6","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 68,"0.6","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 69,"0.6","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 70,"0.6","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 71,"0.6","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 72,"0.6","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 73,"0.7","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 74,"0.7","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 75,"0.7","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 76,"0.7","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 77,"0.7","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 78,"0.7","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 79,"0.8","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 80,"0.8","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 81,"0.8","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 82,"0.8","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 83,"0.8","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 84,"0.8","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 85,"0.9","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 86,"0.9","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 87,"0.9","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 88,"0.9","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 89,"0.9","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 90,"0.9","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 91,"1.0","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 92,"1.0","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 93,"1.0","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 94,"1.0","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 95,"1.0","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 96,"1.0","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 97,"1.1","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 98,"1.1","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 99,"1.1","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 100,"1.1","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 101,"1.1","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 102,"1.1","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 103,"1.2","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 104,"1.2","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 105,"1.2","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 106,"1.2","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 107,"1.2","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 108,"1.2","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 109,"1.3","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 110,"1.3","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 111,"1.3","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 112,"1.3","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 113,"1.3","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 114,"1.3","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 115,"1.4","0.05","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 116,"1.4","0.06","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 117,"1.4","0.07","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 118,"1.4","0.08","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 119,"1.4","0.09","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 120,"1.4","0.10","2","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 121,"0.5","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 122,"0.5","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 123,"0.5","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 124,"0.5","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 125,"0.5","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 126,"0.5","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 127,"0.6","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 128,"0.6","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 129,"0.6","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 130,"0.6","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 131,"0.6","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 132,"0.6","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 133,"0.7","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 134,"0.7","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 135,"0.7","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 136,"0.7","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 137,"0.7","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 138,"0.7","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 139,"0.8","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 140,"0.8","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 141,"0.8","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 142,"0.8","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 143,"0.8","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 144,"0.8","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 145,"0.9","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 146,"0.9","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 147,"0.9","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 148,"0.9","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 149,"0.9","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 150,"0.9","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 151,"1.0","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 152,"1.0","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 153,"1.0","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 154,"1.0","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 155,"1.0","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 156,"1.0","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 157,"1.1","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 158,"1.1","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 159,"1.1","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 160,"1.1","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 161,"1.1","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 162,"1.1","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 163,"1.2","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 164,"1.2","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 165,"1.2","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 166,"1.2","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 167,"1.2","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 168,"1.2","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 169,"1.3","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 170,"1.3","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 171,"1.3","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 172,"1.3","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 173,"1.3","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 174,"1.3","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 175,"1.4","0.05","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 176,"1.4","0.06","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 177,"1.4","0.07","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 178,"1.4","0.08","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 179,"1.4","0.09","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 180,"1.4","0.10","3","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 181,"0.5","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 182,"0.5","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 183,"0.5","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 184,"0.5","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 185,"0.5","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 186,"0.5","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 187,"0.6","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 188,"0.6","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 189,"0.6","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 190,"0.6","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 191,"0.6","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 192,"0.6","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 193,"0.7","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 194,"0.7","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 195,"0.7","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 196,"0.7","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 197,"0.7","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 198,"0.7","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 199,"0.8","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 200,"0.8","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 201,"0.8","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 202,"0.8","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 203,"0.8","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 204,"0.8","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 205,"0.9","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 206,"0.9","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 207,"0.9","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 208,"0.9","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 209,"0.9","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 210,"0.9","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 211,"1.0","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 212,"1.0","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 213,"1.0","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 214,"1.0","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 215,"1.0","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 216,"1.0","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 217,"1.1","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 218,"1.1","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 219,"1.1","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 220,"1.1","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 221,"1.1","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 222,"1.1","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 223,"1.2","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 224,"1.2","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 225,"1.2","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 226,"1.2","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 227,"1.2","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 228,"1.2","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 229,"1.3","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 230,"1.3","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 231,"1.3","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 232,"1.3","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 233,"1.3","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 234,"1.3","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 235,"1.4","0.05","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 236,"1.4","0.06","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 237,"1.4","0.07","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 238,"1.4","0.08","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 239,"1.4","0.09","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 240,"1.4","0.10","4","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 241,"0.5","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 242,"0.5","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 243,"0.5","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 244,"0.5","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 245,"0.5","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 246,"0.5","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 247,"0.6","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 248,"0.6","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 249,"0.6","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 250,"0.6","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 251,"0.6","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 252,"0.6","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 253,"0.7","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 254,"0.7","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 255,"0.7","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 256,"0.7","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 257,"0.7","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 258,"0.7","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 259,"0.8","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 260,"0.8","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 261,"0.8","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 262,"0.8","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 263,"0.8","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 264,"0.8","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 265,"0.9","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 266,"0.9","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 267,"0.9","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 268,"0.9","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 269,"0.9","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 270,"0.9","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 271,"1.0","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 272,"1.0","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 273,"1.0","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 274,"1.0","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 275,"1.0","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 276,"1.0","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 277,"1.1","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 278,"1.1","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 279,"1.1","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 280,"1.1","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 281,"1.1","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 282,"1.1","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 283,"1.2","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 284,"1.2","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 285,"1.2","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 286,"1.2","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 287,"1.2","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 288,"1.2","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 289,"1.3","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 290,"1.3","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 291,"1.3","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 292,"1.3","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 293,"1.3","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 294,"1.3","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 295,"1.4","0.05","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 296,"1.4","0.06","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 297,"1.4","0.07","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 298,"1.4","0.08","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 299,"1.4","0.09","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion" 300,"1.4","0.10","5","","/Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/Slicer3 --launch /Users/admin/GSlicer3-3.3-alpha-2009-02-01-darwin-x86-0.7.2.alpha/lib/Slicer3/Plugins/GradientAnisotropicDiffusion"