IGT:ToolKit/Build-IGSTK-Windows

Build IGSTK

• Create directory IGSTK-build, then configure the project using CMake 2.6 or hiher. Here is an example of how IGSTK is configured:

IGSTK cmake options

• Bring up Visual Studio, open the project in IGSTK-build and build everything there.

Build IGSTKSandbox

cd to your igt-tutorial folder, then

 $ mkdir IGSTKSandbox-build
 $ cd IGSTKSandbox-build
 $ ccmake ../IGSTKSandbox

Configure using CMake 2.6. You need ITK, VTK and IGSTK for this configuration. ITK and VTK can be found in your Slicer3-lib folder after Slicer3 has been built. IGSTK was built in the previous step. Here is an example of how IGSTK is configured (note that you should refer to the IGSTK folder and not the IGSTK-build folder):

BUILD_SHARED                     ON
BUILD_TESTING                    ON
CMAKE_BACKWARDS_COMPATIBILITY    2.4
CMAKE_BUILD_TYPE
CMAKE_INSTALL_PREFIX             /usr/local
DART_ROOT                        DART_ROOT-NOTFOUND
DOT                              DOT-NOTFOUND
EXECUTABLE_OUTPUT_PATH           /home/hliu/projects/igstk/IGSTKSandbox-build/bin
FLTK_DIR                         FLTK_DIR-NOTFOUND
IGSTKSandbox_BUILD_EXAMPLES      ON
IGSTKSandbox_BUILD_SUPERVISED_   OFF
IGSTKSandbox_BUILD_TESTING       ON
IGSTKSandbox_SEND_TRANSFORMS_T   ON
IGSTKSandbox_TEST_AURORA_ATTAC   ON
IGSTKSandbox_TEST_AURORA_PORT_   0
IGSTKSandbox_TEST_FLOCKOFBIRD_   OFF
IGSTKSandbox_TEST_FLOCKOFBIRD_   1
IGSTKSandbox_TEST_LOOPBACK_ATT   OFF
IGSTKSandbox_TEST_LOOPBACK_POR   1
IGSTKSandbox_TEST_POLARIS_ATTA   OFF
IGSTKSandbox_TEST_POLARIS_PORT   0
IGSTKSandbox_USE_FLTK            OFF
IGSTKSandbox_USE_MicronTracker   OFF
IGSTKSandbox_USE_OpenIGTLink     ON
IGSTKSandbox_USE_Qt              OFF
IGSTKSandbox_USE_vtkKWImage      ON
IGSTK_SOURCE_DIR                 /home/hliu/projects/igstk/IGSTK
IGSTK_USE_COORDINATE_REFERENCE   ON
ITK_DIR                          /home/hliu/projects/Slicer3-lib/Insight-build
LIBRARY_OUTPUT_PATH              /home/hliu/projects/igstk/IGSTKSandbox-build/bin
VTK_DIR                          /home/hliu/projects/Slicer3-lib/VTK-build

If the previous command has completed without error, you can start building

 $ make