IGT:ToolKit/Connect-IGSTK-Slicer
From NAMIC Wiki
Home < IGT:ToolKit < Connect-IGSTK-Slicer
Get Slicer ready
- Bring up Slicer
- Go to OpenIGTLink IF module (Modules -> OpenIGTLink IF)
- Connectors -> Add -> Server -> Active
Now Slicer is ready to receive tracking data at the default port 18944.
Customize the tracker
Any IGSTK supported tracking device is configured by an xml file. Here is an example for NDI aurora system:
<?xml version="1.0" encoding="ISO-8859-1"?> <tracking_system type = "aurora"> <refresh_rate> 20 </refresh_rate> <serial_communication> <com_port>5</com_port> <baud_rate>115200</baud_rate> <data_bits>8</data_bits> <parity>N</parity> <stop_bits>1</stop_bits> <hand_shake>0</hand_shake> </serial_communication> <tool> <name> reference frame </name> <control_box_port>1</control_box_port> <control_box_channel>0</control_box_channel> <send_to>134.174.54.211:18944</send_to> </tool> </tracking_system
You need pay a close attention for these two fields:
<com_port>5</com_port>: This is the serial port number you connect Aurora to your computer.
<send_to>134.174.54.211:18944</send_to>: The ip address of the computer running Slicer and the port number Slicer to receive tracking data. Use localhost:18944 if both IGSTK and Slicer run on the same computer.
Run OpenIGTLinkTrackerBroadcasting
- IGSTK package is changing daily. If you compile IGSTK and IGSTKSandbox from recent cvs source tree, OpenIGTLinkTrackerBroadcasting is the application name to get tracking data from a device and send it to Slicer3.
- Run OpenIGTLinkTrackerBroadcasting (OpenIGTLinkTrackerBroadcasting.exe on Windows):
- Open a command prompt or Cygwin terminal
- cd to IGSTKSandbox-build/bin (IGSTKSandbox-build/bin/debug) directory
- Run the command: OpenIGTLinkTrackerBroadcasting auroraConfig.xml (on Linux)or OpenIGTLinkTrackerBroadcasting.exe auroraConfig.xml (on Windows)