Difference between revisions of "Projects:RegistrationDocumentation:ParameterPresetsTutorial"

From NAMIC Wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
 
This page will show you how to load and use the Registration Parameter Presets that come with the Library, and also how to save and exchange your own.
 
This page will show you how to load and use the Registration Parameter Presets that come with the Library, and also how to save and exchange your own.
When entering the parameters in a module, the last values entered are stored as part of the main Slicer Scene. Importing (not "Load").
+
When entering the parameters in a module, the last values entered are stored as part of the main Slicer Scene. Importing (not "Load") this scene file lets you save and load parameter presets.
The ''Register Images" module has a menu at the top that lists the available presets:
+
The ''Register Images'' module has a menu at the top that lists the available presets:
  
===To load a new set from file, do the following: ===
+
[[Image:RegLib_RegPresetsTutorial_0.png|Select Presets via the modules'  ''Parameter Sets'' menu]]
 +
 
 +
 
 +
----
 +
 
 +
 
 +
==To load a new set from file, do the following: ==
  
 
1. Select File / Import Scene...
 
1. Select File / Import Scene...
Line 23: Line 29:
  
  
=== To save your own presets, do the following: ===
+
== To save your own presets, do the following: ==
  
 
1. Save your current state of work
 
1. Save your current state of work

Latest revision as of 17:39, 18 February 2010

Home < Projects:RegistrationDocumentation:ParameterPresetsTutorial

Back to Registration Case Library
Back to ARRA main page
Back to Registration main page

This page will show you how to load and use the Registration Parameter Presets that come with the Library, and also how to save and exchange your own. When entering the parameters in a module, the last values entered are stored as part of the main Slicer Scene. Importing (not "Load") this scene file lets you save and load parameter presets. The Register Images module has a menu at the top that lists the available presets:

Select Presets via the modules' Parameter Sets menu




To load a new set from file, do the following:

1. Select File / Import Scene...

Load Presets via Import Scene.. menu

2. Navigate to and select the preset MRML scene file (must be a .mrml file).

3. Go to the Register Images module. Click on the Parameter set menu. You should now see the newly loaded presets added to the menu. Select the new menu entry to use.

Select Presets via the modules' Parameter Sets menu




To save your own presets, do the following:

1. Save your current state of work

2. Go to the Data Module and delete all nodes so that only the top Scene node remains.

Select Presets via the modules' Parameter Sets menu


3. Select File / Save...

Save Presets via File / Save.. menu


4. Choose your destination directory and change the scene and filename. Then click Save.

Rename Parameter Sets to distinguish them from regular scene files