Slicer3:Build Instructions

From NAMIC Wiki
Revision as of 14:14, 13 January 2007 by Andy (talk | contribs) (→‎Links)
Jump to: navigation, search
Home < Slicer3:Build Instructions

All-in-one Script to checkout and build Slicer3

There's a script called getbuildtest.tcl that makes the support libraries (VTK, ITK, teem, etc) and also builds slicer and does a dashboard submission. Just do the following two commands (see for windows users below):


  svn co http://www.na-mic.org/svn/Slicer3/trunk Slicer3

  ./Slicer3/Scripts/getbuildtest.tcl


Note: that a Slicer3-lib and Slicer3-build directory will be created for you. This is meant to be used to set up new machines and to run nightly testing of the full builds.

To run on unix:

./Slicer3-build/bin/Slicer3

To run on Windows:

./Slicer3-build/bin/RelWithDebInfo/Slicer3.exe

Note: the whole build environment takes about 1.5G of disk space.

Testing

Note also that getbuildtest will do an Experimental submission to the Slicer3 dashboard. If you want to use getbuildtest without submitting to the dashboard, you can set the test type to nothing with

getbuildtest.tcl -t ""

Other options for the -t (--test-type) option are Nightly or Continuous (or any of the CTest options).

What does getbuildtest.tcl do?

This script just automates the steps needed to build slicer. What you end up with is a set of source and build directories that can either be further manipulated with getbuildtest or can be worked with normally. That is, on windows you will have solution files that you can load in visual studio for debugging and further development.

Specifically, getbuildtest does the following steps:

  • Refreshes Slicer3 svn
  • Runs Scripts/genlib.tcl which does the following for each of the support libraries
    • does a cvs/svn checkout/update
    • runs cmake with the correct settings for use with Slicer3
    • runs make (or developer studio) to build the libraries
  • Runs cmake on Slicer3
  • Builds Slicer3
  • Runs ctest on Slicer3
  • (optionally) Runs CPack on Slicer3

Usage

Usage:

 usage: getbuildtest [options] [target]
   [target] is determined automatically if not specified
   [options] is one of the following:
    --help : prints this message and exits
    --clean : delete lib and build directories first
    -t --test-type : CTest test target
    --release : compile with optimization flags
    --update : does a cvs/svn update on each lib
    --pack : builds a distribution package (cpack)

Errors from getbuildtest

You will need to have your firewall configured to allow access to na-mic.org for cvs access through port 2401. Also you need 8081 for submitting to the dashboard.

Other errors might mean you don't have all the build tools (see next section).

Updating Your getbuildtest Build

There are a few options:

  • you can re-run getbuildtest and it will update slicer3 and rebuild (just slicer3)
  • you can add the --update option and all the libs will get a cvs/svn update and will rebuild if needed (good for tracking the development head of VTK/ITK/KWWidgets etc).
  • you can just 'svn update' in the Slicer3 directory and then do 'make' in the Slicer3-build to get just the latest Slicer3 code.

The following command for unix machines will update, build, and launch the latest Slicer3:

svn update && (cd ../Slicer3-build; make && ./bin/Slicer3)


getbuildtest on windows

While still experimental, the script should also work on a properly configured windows environment. Current requirements are:

  • Developer studio 8 Visual C++ Express which is free from Microsoft - be sure to install the Platform SDK and follow the ridiculous manual steps to set up the paths see below.
    • Other releases of visual studio also work (7 and 7.1)
    • If they are installed in the default locations in "c:/Program Files" they will be detected by the build script automatically
  • Cygwin with the following packages
    • tcltk
    • svn
    • cvs
    • unzip
    • curl
  • With Developers Studio and cygwin installed, you only need to do the svn checkout and getbuildtest script to get a fully working Slicer3 plus all the tools you need to develop new code.

configuration options

The file Slicer3/slicer_variables.tcl includes configuration options for which support libraries to use. You may want to change thes for testing or to get access to new functionality.

set ::SLICER_TAG "http://www.na-mic.org/svn/Slicer3/trunk"
set ::CMAKE_TAG "CMake-2-4-2"
set ::TEEM_TAG "Teem-1-9-0-patches"
set ::KWWidgets_TAG "HEAD"
set ::VTK_TAG "VTK-5-0"
set ::ITK_TAG ITK-3-0
set ::TCL_TAG "core-8-4-6"
set ::TK_TAG "core-8-4-6"
set ::ITCL_TAG "itcl-3-2-1"
set ::IWIDGETS_TAG "iwidgets-4-0-1"
set ::BLT_TAG "blt24z"
set ::SANDBOX_TAG "http://svn.na-mic.org/svn/NAMICSandBox/branches/Slicer-2-6"

For example, you may want a build against the ITK cvs head. Change the flag value and then run

getbuildtest.tcl --update 

which will get the version from cvs, build it, and rebuild slicer3. Depending on how radically different the versions you build are, you may need to use --clean.

Another useful option is to change your build type to include support debugging.

set ::VTK_BUILD_TYPE "RelWithDebInfo"

options are Debug, Release, or RelWithDebInfo. RelWithDebInfo is a compromise between speed and debuggability. If you are tracking down a tough C++ bug you will get better information in Debug mode. After changing this flag, you should run

getbuildtest.tcl --clean

to create a completely new build.

Manual checkout/build of Slicer3 and support libraries:

Prerequisite software

You need to get and build the following packages if you aren't using the getbuildtest script:

  1. CMake (2.4.1 or later)
  2. Tcl/Tk (8.4 or later)
  3. incrTcl (3.2.1)
  4. VTK 5.0
  5. ITK 2.8
  6. KWWidgets CVS head

Build Steps

Steps:

$ svn co http://www.na-mic.org/svn/Slicer3/trunk Slicer3
$ cvs -d :pserver:anoncvs@www.vtk.org:/cvsroot/VTK co VTK
$ cvs -d :pserver:anoncvs@www.itk.org:/cvsroot/Insight co Insight
$ cvs -d :pserver:anoncvs@www.kwwidgets.org:/cvsroot/KWWidgets co KWWidgets

You may choose to take VTK5 instead of VTK CVS

Configure and build ITK

  • BUILD_SHARED_LIBS ON
  • CMAKE_SKIP_RPATH ON

Configure and build VTK

  • All systems:
    • BUILD_SHARED_LIBS ON
    • CMAKE_SKIP_RPATH ON
    • VTK_WRAP_TCL ON
    • VTK_DEBUG_LEAKS ON


  • MacOSX specific (Make sure to install X11):
    • VTK_USE_CARBON OFF
    • VTK_USE_X ON


  • Note, those options should not appear, since they disapear since VTK5:
    • VTK_USE_HYBRID ON
    • VTK_USE_PATENTED ON
  • Make sure that the TCL and TK path are set properly
    • TCL_* and TK_*

Configure and build KWWidgets

  • You need to specify where your VTK build tree is.
  • BUILD_SHARED_LIBS ON
  • CMAKE_SKIP_RPATH ON

Build and Run Slicer3

Manually

  1. Check out and build slicer3 (e.g. on linux)
 svn co http://www.na-mic.org/svn/Slicer3/trunk Slicer3
 mkdir Slicer3-build
 cd Slicer3-build
 ccmake ../Slicer3
 make

Again make sure to turn:

  • BUILD_SHARED_LIBS ON
  • CMAKE_SKIP_RPATH ON


Start slicer with the Slicer3Launcher executable in your bin directory.

Links

Information on Free Microsoft C++ Compiler on Windows

Be sure to follow all the steps on Microsoft link. Yes it means you need to download the compiler and sdk.