Difference between revisions of "IGT:ToolKit/Navigation-tutorial"
From NAMIC Wiki
| Line 26: | Line 26: | ||
==Software Installation Instructions== | ==Software Installation Instructions== | ||
=== '''Step 1: Install Slicer3''' === | === '''Step 1: Install Slicer3''' === | ||
| − | + | Visit | |
| + | http://www.slicer.org/DownloadSlicer.php/Nightly | ||
| − | + | follow a link below Downloads corresponding to your computer platform | |
| − | + | Select Slicer3.2-rc1. | |
| − | |||
| − | |||
| − | |||
=== '''Step 2: Install the OpenIGTLink module''' === | === '''Step 2: Install the OpenIGTLink module''' === | ||
Revision as of 15:53, 7 June 2008
Home < IGT:ToolKit < Navigation-tutorial
Back to IGT:ToolKit
Contents
Overview:
This tutorial uses a tracking simulator to explain how navigation works in Slicer3.
The general IGT navigation system consists of the following components:
- Slicer3 - the base platform
- OpenIGTLink module - a loadable software module plugged into Slicer3
- IGSTK - an interfacing tool for common commercial tracking devices
- A tracking device - such as the NDI Aurora magnetic tracking system
The tracking simulator simulates the tracking device and the IGSTK interfacing software.
Those wishing to connect a real tracking system to Slicer3 should see the Advanced Navigation Tutorial.
Tutorial Materials
- Tutorial slides for the Basic Navigation Tutorial
- Atlas: download the .zip file from either the SPL-PNL Brain Atlas or the SPL Abdominal Atlas
- Tool model (right-click to download)
Software Installation Instructions
Step 1: Install Slicer3
Visit
http://www.slicer.org/DownloadSlicer.php/Nightly
follow a link below Downloads corresponding to your computer platform
Select Slicer3.2-rc1.
Step 2: Install the OpenIGTLink module
OpenIGTLink is a communication protocol used to interface Slicer3 with external devices, such as trackers, imaging devices and robots. OpenIGTLink is currently distributed as a loadable module for Slicer3.
- Step 2a: You have the choice of either downloading a precompiled version (binary) OR building it yourself from the source code:
- Precompiled OpenIGTLink module (for use with Slicer 3.2): Download and unzip.
- Building the OpenIGTLink module from source code: Find the instructions here
- Step 2b: Copy the binary into your-slicer3-build(install)-directory/lib/Slicer3/Modules. You should see the OpenIGTLink module in the Slicer3 module list once Slicer3 is started.
Step 3: Install the tracker simulator
The tracking simulator will be used to generate and send fake tracking data to Slicer3.
- You have the choice of either downloading a precompiled version (binary) OR building it yourself from the source code:
- Precompiled tracking simulator: Download and unzip.
- Building the tracker simulator from source code: Find the instructions here
